It is very characteristic for tropical waterlilies to bloom multiple

flowers each day from May – Oct in some zones.

Tropical waterlilies are grown from a bulb and will return to a bulb state in the cold winter months.

You can see blooming ready to add to your pond potted tropical waterlilies at Sunland Water Gardens.

call 818 353 5131 for availability

We carry many different varieties to choose from.

White Hardys typically have solid green leaves and slight fragrance.

They spread from a rhizome-  sending out eyes to start new plants.

Sunland Water Gardens has the best selection of Hardy Waterlilies.

Come in to see our great selection of aquatic plants

Sunland Water Gardens – 818 353 5131

There are many new trends surfacing in gardening, and water gardening is one of the main new interests.  Water gardening can be in the form of waterfalls, ponds, fountains, all of which can be enhanced by rock work combinations and lighting, plants, and fish.  Water gardening doesn’t have to be a pond or natural water source either, it can consist of just a plastic tub, basically anything that can hold water.

The most important thing to consider in water gardening is probably the spot chosen.  Since plants and fish both need plenty of sunlight, places in direct light away from trees and bushes is the best place.  This will also help prevent leaves and debris from collecting in the water.

When planning for a water garden first decide the size you want.  This will depend on how much money you are willing to spend because water gardening can get a bit expensive if you opt for a large garden full of plants, rocks, fish, and lights.  Also consider the size of our property, and the amount of time you want to spend with maintaining your water garden.

When you choose what type of aquatic plants you wish to have, remember that the plants should only cover about half of the water.  Plants can be free floating, submerged, or marginal.  Which you choose is all a matter of personal preference.  Some plants are good for their scent, some provide more oxygen than others and will keep the pool health, and some are just beautiful. Fish are not only nice to look at but they are also very beneficial.  Fish help keep debris at a minimum and help in controlling larva and other insects.

One of the main difficulties in water gardening is keeping water clear of algae.  Algae problems are usually caused from too many nutrients in the water from feeding fish too often or from over fertilizing plants.  If ponds are made correctly and are maintained properly algae problems and control will be kept at a minimum.

All garden pools regardless of size will need maintenance throughout the year. With proper planning you can ensure a healthy balance between living and decorative features of a water garden that can almost care for itself with simple maintenance inputs from you.
You can get rid of algae by reducing on the nutrients that cause the algae by cutting back on feeding and fertilizing, planting more plants, installing a filter system, or replacing existing water with fresh water.  There are some chemicals that can be used, like copper compounds, but overuse can kill plant life and fish.

Water gardening doesn’t take anymore time than regular gardening, but obviously isn’t near the same thing.  You may be the type person who couldn’t grow a flower if you tried but would be excellent at water gardening.  If you are looking for a way to occupy some time or to beautify your yard, water gardening is an excellent way. We can help you plan, build and maintain your pond. We have everything you will need do easily do it yourself. At Sunland Water Gardens we have been doing ponds for over 30 years. If you have any questions our expert staff can happily walk you through every asspect of water gardening!                         Call 818 353 5131 for more pond info!

“Attraction“-  Spread: 4-5′ diameter.  Foliage: New leaves bronze turning to green. Large red flowers have very slight scent. Sunlight: 4-6 hours of direct sun. Will grow in water up to 3′; tolerates summer heat better than most red water lilies.

“REMBRANDT”- The outer petals are a delicate pink while the inner petals turn a deep crimsom . Not only is this lily attractive and forgiving, it is also one of the few red water lilies that will flower in part shade.  If your pond is surrounded by trees, might     be a good choice.

“JAMES BRYDON” –

James Brydon Hardy Water Lily is a profuse bloomer with cup shaped flowers. Very fragrant.  It is a double blooming hardy lily of a rosy red color, shiny leaves. New foliage purplish and slightly mottled. Works in small to large ponds. Spreads 3-4 feet. Flowers May -Sept. 

Typha latifolia variegatus

Hardy  zone 3-11

Growing height: 3-4′

Thrives in full sun to partial shade.Green and white striped foliage highlighted by large brown catkins in summer.

Typha leaves are alternate and mostly basal to a simple, jointless stem that eventually bears the flowering spikes. The rhizomes spread horizontally beneath the surface of muddy ground to start new upright growth, and the spread of Typha is an important part of the process of open water bodies being converted to vegetated marshland and eventually dry land.

Typha plants are monoecious and bear unisexual, wind-pollinated flowers, developing in dense spikes. The numerous male flowers form a narrow spike at the top of the vertical stem. Each male (staminate) flower is reduced to a pair of stamens and hairs, and withers once the pollen is shed.

Water Clover  (Marsilea quadrifolia)

Marsilea Mutica is a four leaf water clover cultivar. Four Leaf Clovers are classified as an amphibious plant. In water gardening this banded nardoo is a perennial herb.

Four leaf clover can be planted in a small pot and left on the water gardening shelf. Doing this in three to four inches of water will add an interesting visual display. Water clover will survive this way to a temperature low of 20 º Fahrenheit or -6.67 º Celsius.

Water Clover is a good form of shade for the fish you are gardening for. This is because it floats above the surface tension like pond lillies.

Four leaf clover-marsilea Mutica-banded nardoo float above algae starving algae out of sunlight. Water clover beats algae to nutrients since it has a more efficient system to absorb nutrients.

Also known as the Flamingo Plant or Java Dropwort, it’s a popular favorite for Koi ponds since it makes a nutritious snack for hungry mouths. Some gardeners recommend rotating two planters – keeping one in the pond for koi and another kept away from koi and allowed to grow back – to maintain a constant supply on hand.

Though it is a lovely ornamental plant, the Variegated Water Celery is fast growing so take care in placement and expect plenty of spread. When placed properly, the Variegated Water Celery makes an excellent ground cover and a great choice for bog filters. Plants will grow fastest in wet soil under direct sun. Zones 6 to 11.

Approximate  Size: 12″ to 18″

In order to be successful at keeping or treating goldfish and koi, you must first be sure that you are providing the fish with the best possible water conditions. At Sunland Water Gardens we can help you will all aspects of balance and pond cycles. Just call 818 353 5131.

Many times, bad water quality is what causes fish to become diseased in the first place. The following are the water quality parameters that must be adhered to in order to be successful.

Toxic chemicals from your water supply – Chlorine and chloramines are both commonly used to disinfect public water supplies. Both are lethal to fish. They can be easily eliminated with commercial water conditioners that are available to neutralize these poisonous compounds present in tap water.

Temperature – Temperatures should be between 65 and 85 degrees. Goldfish and koi will thrive below 65 degrees, but disease treatment is much more effective at higher temperatures because the fish’s immune system is functioning better. Be sure to keep your holding facilities in the shade if possible to avoid high temperatures.

Dissolved Oxygen – Fish need oxygen in the water to survive. A lightly stocked pond may not need additional aeration. If you have more than just a few fish in your pond or holding tank, additional aeration may be needed. You can purchase air blowers, airstones, or paddle type aerators made for the purpose.

Inexpensive oxygen test kits can be purchased at most pet shops. Levels need to be above 6 ppm at all times.

Ammonia – Ammonia comes from fish waste or decomposition of uneaten food. Ammonia levels will quickly rise to lethal levels in a system with new or uncycled filters (see “The Cycle” for further information). Levels need to be maintained as close to 0 ppm as possible. If levels are consistently above 0.5 ppm, you need to decrease stocking densities, feeding, and /or increase filtration. The combination of high ph and high ammonia is especially dangerous because with each 1 point increase in ph (for example from ph 7 to ph 8 ) the ammonia present is 10 times more toxic. (Ammonia is 100 times more toxic when you go from ph 7 to ph 9). You cannot smell or see high levels of ammonia. You MUST use test kits.

Nitrite – Bacteria in your filter system consumes ammonia. However, a byproduct of this is another toxic chemical called nitrite. It must also be monitored. Aim for 0 ppm. Anything above 0.15 ppm is stressful to the fish and can cause disease. To correct high nitrite levels, increase water changes and filtration, decrease feeding and stocking densities. You can also add uniodized salt, 3 lbs/100 gallons, to decrease the toxicity of nitrite. Nitrite accumulation will quickly kill fish in systems without fully cycled biofilters (see The Cycle).

ph – ph is the measurement of hydrogen ions in your water. Aim for ph of 7-9. Fish can survive at a lower ph. However, at this point, you are dangerously close to a ph crash, resulting in severe stress to your fish. Remember that as the bacteria in your filter does its job, it will gradually “use up” the carbonates in the water, resulting in a declining ph. Therefore it’s important to continually monitor your ph. A ph above 9 is not harmful by itself. However, if you have any ammonia in your water, it is much more toxic (see the ammonia section). To increase ph, add sodium bicarbonate (baking soda) @ 1 teaspoon per 10 gallons until the desired level is reached. Lowering ph is a little more difficult. Adding peat or vinegar is somewhat effective. Ponds with “pea-soup” water in them will have wide fluctuations in ph due to the photosynthesis of the algae. Elimination of the green water will correct the problem. New concrete holding tanks leech out lime and will cause high ph. Let them cure for several weeks before adding fish.

THE “CYCLE”

“The Cycle” refers to the sequence of events that take place in all new biofilters during the first few weeks of operation. It’s important to understand the process so that you can avoid stressing your fish during the beginning of the season. During early spring, retailers who keep their fish outdoors are faced with the following scenario: You want to start bringing in fish to sell, but your filter is either new or has been shut down for the winter. In order for your filter to become functional and mature, it has “to cycle”. The process usually takes 6 to 8 weeks. Fish produce a highly toxic chemical called ammonia. As it is produced by the fish a family of beneficial bacteria called Nitrosomonus will start to grow on your filter media and consume the ammonia, converting it to another harmful chemical called nitrite. As nitrites become present, a second kind of bacteria, Nitrobacter, will start to grow and consume the nitrite, converting it to relatively harmless nitrate. When you first put fish into your system, the ammonia will get very high, very quickly. During this period, keep stocking densities low and do lots of water changes. As the ammonia levels decrease, nitrite levels will increase rapidly. During this period, keep stocking densities low, do water changes, put salt in @ 3-4 lbs/per 100 gallons to reduce the toxicity of nitrites. When levels of both ammonia and nitrite bottom out, you have a mature, fully functional biofilter, capable of processing all of the wastes from your fish. You can now slowly increase stocking densities. To speed up the process, add filter media from a mature filter.